Gigaset gigaset se 105 Скачать руководство пользователя страница 89

Страница: 89 / 115

Gigaset Router Administration

Gigaset Router / de / A31008-E105-B100-2-19 / admin_router.fm / 05.06.2003

Firmware Upgrade

You can load the latest firmware for the router. First you will have to obtain the latest

firmware version. This is available on the Siemens website

www.my-siemens.com/se105. Then carry out the following steps:

◆

Download the new firmware from the Siemens website and save it on your PC.

◆

Close down all network activities on your local network.

◆

In the

Tools

menu, select

Firmware Upgrade

◆

Click on

Browse

and select the file you downloaded from the Internet.

◆

Click on

APPLY

◆

A window will appear prompting you to confirm that you want to update the

firmware. Click on

◆

The next window will warn you that the router will not be available for about a

minute during the upgrade procedure. Acknowledge this message

promptly

with

The firmware will now be updated.

After successful upgrading, the router is automatically rebooted. All the LEDs will go

out. Once the process has been completed, the PWR LED will light up again. The

browser will show the router login screen.

Some browsers abort the upgrade process if you do not click on

immediately.

Do not switch the router off during the upgrade procedure.

Use the

Status

tab in

INFORMATION

to check whether the upgrade

process was in fact successful (see page 90). Here you should see the

latest firmware version for your router.

Содержание gigaset se 105




















































































































Результаты поиска

Содержание gigaset se 105

Отзывы:

Gigaset gigaset se 105, Руководство пользователя, Страница: 89 / 115

Результаты поиска

Содержание gigaset se 105

Отзывы: