Gigaset gigaset se 105 Скачать руководство пользователя страница 12

Страница: 12 / 115

First Steps

Gigaset Router / de / A31008-E105-B100-2-19 / device.fm / 05.06.2003

Back panel

The back panel of the Gigaset Router houses the various sockets.

Element

Description

DC IN 9V-1A
MAX

Socket for the supplied power unit.

Warning

: Using the wrong power supply unit may damage the router.

Reset

Reset function. Use this button to

◆

boot the router.

Hold the button down for one second.

◆

reset all the settings to the factory defaults.

Hold the button down for five seconds.

Warning:

This will clear all the configuration settings you have

made.

Updated firmware will not be affected.

WAN

WAN socket (RJ-45) for a DSL or cable modem.

LAN1-LAN4 Four 10/100

Mbps

switch sockets with automatic recognition (RJ-45).

You can connect up to four Ethernet devices (such as PCs, a

Hub

Switch

Содержание gigaset se 105




















































































































Результаты поиска

Содержание gigaset se 105

Отзывы:

Gigaset gigaset se 105, Руководство пользователя, Страница: 12 / 115

Результаты поиска

Содержание gigaset se 105

Отзывы: