42
Using the directory and other lists
Gigaset S44 / englisch / A31008-M368-B103-1-7619 / directories.fm / 21.2.05
Voice dialling
You can dial numbers from the directory by speaking the name. In order for your tele-
phone to be able to "recognise" you, you must record a voice pattern for each name, i.e.
loudly say the name into the handset and store it.
You can also set your phone so that it announces the name of a caller for an external
call instead of ringing (page 97).
You can store voice patterns for a
total
of 30 directory entries. Entries with voice pat-
terns are marked with
´
.
Recording voice patterns
Record your voice pattern in quiet surroundings. Your mouth should be around 25 cm
away from the handset. The voice pattern can be 1.5 seconds long.
You will hear a short beep. The display will prompt you accordingly. Speak the name.
Repeat the name after being prompted to do so by the display and by a further beep.
To
change
a voice pattern, you must delete it (page 43) and re-record it.
Using voice dialling
Speak the name after the beep. If the name matches the recorded voice pattern, it is
repeated. The number is dialled.
Playing voice patterns
i
If you predominantly use voice dialling with a handsfree kit, it is beneficial
to also use the handsfree kit to record the voice pattern.
s
¢
s
(select entry; page 38)
v
Open the menu.
Record Pattern
Select.
OK
Press the display key to start the recording.
i
If there is insufficient memory for a new voice pattern, a message will
appear on the display. The phone automatically returns to the directory.
Delete a voice pattern and select
Record Pattern
again.
t
Hold
down.
s
¢
s
(select entry with
´
)
v
Open the menu.
Play Pattern
Select and press
OK
. The voice pattern will be played
in handsfree mode.
a
Hold
down (idle status).