103
System settings
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / settings_bs.fm / 08.10.2003
In the list of call diverts set up, those for which automatic call divert is set are indicated.
Setting up an internal group call group
You can make a group call from any telephone registered on the base station to all other
registered internal users (page 20).
By default, all registered users with the device type
Telephone
or
Neutral
are set up in
the group call group.
Setting up ring delay
Ring delay can be used to individually set up a party per receive MSN to ring later. During
this ring delay time, the terminal can accept the call using the
Accept?
function
without hearing a ring. The ring delay time is given in rings. There are 5 seconds
between rings.
The factory default setting is 0 rings (= not activated).
Take into account the response time of the answering machine when making this
setting (factory default:
Automatic 2/4
). If the set ring delay is longer than the setting
for an active answering machine, the phone will not ring, because the answering
machine will answer it first.
For each programmed MSN, at least one party must be able to be called immediately.
Therefore, a user for whom a ring delay is set up will be called immediately if he is the
only one on this receive MSN, or no one else can be reached on this receive MSN.
s
Auto.forwarding
Select the menu item and confirm.
s
W
Select MSN and open submenu, e.g.
MSN1: Anna
.
~
W
Enter destination number and open the submenu.
Save entry
Confirm. Automatic call divert is activated (
‰
= on).
j
Hold
down (back to idle status).
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 90).
s
Setup user
Select the menu item and confirm.
s
Setup device
Confirm.
s
Int.11
W
Select internal number and open submenu,
e .g.
Int.11
.
s
Hunt group
Select the menu item and confirm (
‰
= activated).
j
Hold
down (back to idle status).
OK
OK
OK
OK
OK
OK
