99
System settings
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / settings_bs.fm / 08.10.2003
The factory default setting is 0 rings (= immediate call divert).
Diverting calls externally – CF (Call Forwarding)
For each receive MSN you can store a destination number for each of the following
conditions:
Immediately
–
On busy
–
On no reply
Set up external call diverts are entered in a list. Active call diverts are identified in this
list.
When the phone is supplied external call divert is not set.
Setting up the divert destination
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Forward. base
Select the menu item and confirm.
~
Enter system PIN if required (page 90).
s
No. of rings
Select the menu item and confirm.
~
Enter the number of rings and confirm.
j
Hold
down (back to idle status).
OK
OK
OK
OK
OK
i
◆
If call divert is carried out on the base station (internal) (page 101),
the condition
On busy
is not available.
◆
All three conditions can be activated at the same time.
◆
If Night service has been set up for a receive MSN (page 87), external
call divert cannot be set up or changed for this receive MSN.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Ext. call forw.
Select the menu item and confirm.
~
Enter system PIN if required (page 90). The list of set
up call diverts is displayed.
W
Press the display key to open the submenu.
New entry
Confirm.
s
W
Select receive MSN and open submenu,
e.g.
MSN1: Anna
.
s
Immediately
Select the condition and confirm,
e.g.
Immediately
.
You will be notified if you have selected an MSN for
which another internal user has already set up call
divert. You can either return using
BACK
to select
another setting or use
NEXT
to continue.
OK
OK
OK
OK
OK