39
Using the handset
Gigaset C810/810 A / CHN en/ A31008-M2327-Y101-1-7619 / HS_using.fm / 15.09.2011
V
e
rsion 4, 16.0
9
.2005
Registering handsets
Manual registration of the Gigaset
C810H on Gigaset C810/810 A
If you want to register additional handsets.
you must activate manual registration of the
handset (1) on both the handset (2) and the
base.
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g.
INT 1
. If not, repeat
the procedure.
On the handset
If the handset is not registered to a base the
display shows:
§Ok§
Press the display key to start the
registration.
~
Enter the current system PIN
and press
§Ok§
.
A message indicates that a search for a base
that is ready for registration is being carried
out.
On the base
Within 60 seconds press and
the regis-
tration/paging key
A
approx. 3 seconds.
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
On the handset
Start to register the handset as described in
its user guide.
On the base
Press and
hold
the registration/paging key
on the base
A
page 2) for approx. 3
seconds.
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset C59H
handset.
§§Menu§§
¢
Å
¢
De-Register Handset
s
Select the internal subscriber
you wish to deregister and press
§Ok§
.
~
Enter the current system PIN
and press
§Ok§
.
§Ok§
Press the display key to confirm
the action.
Register Handset
Ok
Redial
Ð
Register Handset
Please note
If four handsets are already registered,
no additional handset can be registered
to the base. If the 5th handset intends to
register to the base, an error tone is out-
put and the display shows
Memory Full
.
