52
Handset settings
Gigaset C590 / SEA / A31008-M2101-Y701-1-7619 / registr_sett.fm / 14.04.2010
V
e
rsion 4, 16.0
9
.2005
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. After doing this, only
one entry instead of multiple entries can be
shown at the same time on each display and
names are shortened where necessary.
v
¢
Ï
¢
Display
¢
Large Font
§Change§
Press display key (
³
= on).
Setting the colour scheme
You can set the display to have a dark or light
background.
v
¢
Ï
¢
Display
¢
Colour Schemes
Select
Colour Scheme 1
or
Colour Scheme 2
and press
§OK§
.
Setting the display backlight
Depending on whether or not the handset is
in the base/charging cradle, you can activate
or deactivate the lighting. If it is activated,
the display is permanently dimmed. If the
backlight is deactivated it is switched on by
pressing any key. In this case the pressed key
has no other function.
v
¢
Ï
¢
Display
¢
Backlight
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select
On
or
Off
.
Out of Charger
Select
On
or
Off
.
§Save§
Press the display key.
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the base/charging cradle without hav-
ing to press the talk key
c
.
v
¢
Ï
¢
Telephony
¢
Auto Answer
§Change§
Press display key (
³
= on).
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree talking and the earpiece volume
to five different levels.
In idle status:
t
Call up the
Handset Volume
menu.
r
Set the earpiece volume.
s
Scroll to the
Speaker:
line.
r
Set the speaker volume.
§Save§
Press the display key if neces-
sary to save the setting perma-
nently.
Setting the volume during a call:
t
Press the control key.
r
Select
volume.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key
§Save§
.
If
t
is assigned to another function:
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Please note
With the
On
setting, the standby time
of the handset can be significantly
reduced.
•
Please note
You can also set the call volume using the
menu (
•
