45
Setting the alarm clock
Gigaset C590 / SEA / A31008-M2101-Y701-1-7619 / registr_sett.fm / 14.04.2010
V
e
rsion 4, 16.0
9
.2005
Setting the alarm clock
Precondition:
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
É
¢
Alarm Clock
¤
Change multiple line input:
Activation:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
In idle status, the
¼
icon and wake-up time
are displayed.
A wake-up call is signalled on the display
and with the selected ringtone (
The wake-up call sounds for 60 seconds. If
no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Precondition
: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
Using several handsets
Registering handsets
You can register up to six handsets to your
base.
A Gigaset C59H handset can be registered
on up to four bases.
Manual registration of the
Gigaset C59H on Gigaset C590
You must activate manual registration of the
handset on both the handset (1) and the
base (2).
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g.
INT 1
. If not, repeat
the procedure.
1) On the handset
The handset must not be registered to a
base.
§Register§
Press the display key.
The handset is already registered to a base:
v
¢
Ï
¢
Registration
¢
Register Handset
If the handset is already registered on four
bases:
s
Select base, e.g.
Base 3
and
press
§OK§
.
~
If required, enter the system
PIN for the base and press
§OK§
.
A message displays that a search for a base
that is ready for registration is being carried
out.
2) On the base
Within 60 seconds press and
hold
the reg-
istration/paging key on the base
(
page 1) (approx. 3 seconds).
