44
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
System
Gigaset C530HX / LHSG IM4 - GR en / A31008-M2761-R701-1-8019 / settings_BS.fm / 11/18/15
Availability and operation of the functions
may differ on your telephone.
Updating the phone firmware
(only on a Gigaset GO-Box 100 or other Gigaset-IP base)
The firmware update is downloaded directly from the Internet by default. The relevant web page
is preconfigured in your phone.
Starting the firmware update manually
¤
. . . use
to select
Settings
OK
System
Update Firmware
OK
. . . use
to enter the system PIN
OK
. . . the telephone establishes an Internet
connection to the configuration server
Yes
Updating firmware automatically
The phone will check daily whether a newer firmware version is available on the Internet
configuration server. If so, the message
New firmware available
is displayed on the handset.
¤
Confirm prompt with
Yes
. . . the firmware is downloaded to the telephone
If you respond to the prompt with
No
, the handset returns to idle status. Your phone will no
longer remind you that firmware updates are available. The message will only be shown again if
a newer version of the firmware is available to download.
DNS-Server:
¤
DNS Server
. . . use
to enter the IP address of the
preferred DNS server
The DNS server (Domain Name System) converts the symbolic
name of a server (DNS name) into the public IP address for the
server when the connection is made. You can specify your router's
IP address here. The router forwards phone address requests to its
DNS server.
Save:
¤
Save
It is also possible to make the settings via the Web configurator.
Display current IP address:
Press the Paging key on the base station
The phone is connected to the Internet (i.e. connected to a router).
The phone is in idle status i.e. no calls are being made, there is no internal connection
between registered handsets and the menu is not open on any handset.
The firmware update can take up to 6 minutes, depending on the quality of your DSL
connection.
When updating from the Internet, checks are made to ensure that no newer version of
the firmware exists. If this is not the case, the operation is terminated and a message is
issued to that effect.
If the telephone is not connected to the Internet at the time when the check for new
firmware is due to be performed (e.g. because the router is deactivated), the check is
performed as soon as the phone is reconnected to the Internet.
You can deactivate the automatic version check via the Web configurator.