113
Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / web-conf.fm / 25.03.2015
Te
mplat
e
B
o
rn
eo
, V
e
rs
ion 1
, 21.
06
.2
012
Configuring the phone via the Web configurator
Setting DTMF signalling for VoIP
You can change the settings for DTMF signalling in the
DTMF over VoIP connections
area on the
web page:
Settings
¤
Telephony
¤
Advanced VoIP Settings
DTMF signalling is required, for example, for querying and controlling certain network
mailboxes via digit codes or for remote operation of a local answer machine.
To send DTMF signals via VoIP you must first define how key codes should be converted into and
sent as DTMF signals: as audible information via the speech channel or as an "SIP Info" message.
Ask your VoIP provider which type of DTMF transmission it supports.
You can configure your telephone in such a way that it attempts with each call to set the most
suitable DTMF signalling for the current codec (
Automatic)
.
Or you can explicitly define the type of DTMF signalling:
u
Audio
or
RFC 2833
if DTMF signals are to be transmitted acoustically (in voice packets).
u
SIP Info
if DTMF signals are to be transmitted as code.
Configuring call transfer via VoIP
You can change the settings for call transfer in the
Call Transfer
area on the web page:
Settings
¤
Telephony
¤
Advanced VoIP Settings
You can connect an external call to one of your VoIP connections with a second external
participant (depending on the provider). You do this by establishing an external consultation
call to the second participant and pressing the R key on the handset once the second participant
has answered. The call is transferred.
You can expand or change the settings for call transfer as follows:
u
You can activate call transfer by ending the call. The two external participants are connected
with one another when you press the End call key
a
on the handset. Your connections with
the participants are terminated.
u
You can activate direct call transfer. You can then transfer the call before the second
participant has answered.
u
You can deactivate call transfer with the R key if you want to assign a different feature to the
R key (see below "Defining R key function for VoIP (hook flash)").
Notes
u
The settings for DTMF signalling apply to all VoIP connections (VoIP accounts).
u
DTMF signals cannot be transmitted in the audio path (
Audio
) on broadband
connections (the G.722 codec is used).
Содержание C530 IP
Страница 168: ......
Страница 342: ......
Страница 518: ...174 Gigaset C530 IP LUG USA es A31008 XXXXX XXXX X XX Cover_back fm 3 25 15 Template Borneo Version 1 21 06 2012 ...