Gigaset AL415A, Руководство пользователя

Страница: 18 / 24

18
Gigaset AL415A / Großbritannien / A31008-M2501-L121-1-7619 / Penguin.fm / 5/3/21
Te
mpla
te Bali,
V
e
rsion 1, 1
6
.02.201
2
Questions and answers
If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service
for 24-hour support. The table below contains a list of common problems and possible solutions.
Problem Cause Solution
Nothing appears on
the display. The handset is not switched on.
The batteries are flat.
Press the end call key
a
for approx. 5 seconds or place
the handset in the base station.
Charge or replace the batteries.
No wireless connec-
tion to the base sta-
tion,
Base flashes in
the display.
The handset is outside the range of
the base station.
The base station is not turned on.
Move the handset closer to the base station.
Check the mains connector on the base station
page 3.
The display shows
Register HS or Put
into base .
Handset has not been registered
with the base station or has been
de-registered. Register the handset page 12.
Handset does not
ring. The ring tone is deactivated.
The phone only rings if the phone
number has been transferred.
The phone does not ring in a spe-
cific time period.
Activate the ring tone page 14.
Activate the ring tone for anonymous calls page 14.
Deactivate the "Time Control" or change the time period
page 14.
You cannot hear a
ringer/dialling tone
from the fixed line
network. The phone cord supplied has not
been used or has been replaced by
a new cord with the wrong jack
connections. Please always use the phone cord supplied or ensure
that the pin connections are correct when purchasing
from a retailer: 3-4 assignment of telephone leads/
EURO CTR37.
Error tone sounds
after system PIN
prompt.
PIN forgotten.
The system PIN you have entered is
incorrect. Reset the system PIN to the default 0000 page 15.
All handsets are de-registered. All settings are reset.
All lists are deleted.