15
Gigaset A475/A475A (A415x) / BE-NL / A31008-M2501-M201-1-3F19 / Penguin.fm / 31.07.2017
Te
mpla
te Bali, V
e
rsion
1, 16.0
2.2012
Activating/deactivating the ringer
Deactivating/reactivating the ringer permanently
In idle status, press and
hold
the star key
P
. If the ringer is deactivated, the
Ú
icon appears in the display.
Deactivating the ringer for the current call
§Menu§
¤
Silent
¤
§OK§
Setting ring tones of the base station (A475A only)
Set the
Ringer Volume, Ringer Melody
and the
Time Control
for the base station:
§Menu§
¤
q
Settings
¤
§OK§
¤
q
Base
¤
§OK§
¤
Audio Settings
¤
§OK§
¤
q
Ringer Volume/Ringer Melody
/
Time Control
Perform the setting analogously to the description in "Setting ring tones of the handset".
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
§Menu§
¤
P#Q5#1M
¤
The number for the current setting flashes:
0
= off;
1
= on
¤
enter number
¤
§OK§
.
Repeater mode
With a repeater, you can increase the range of your base station. You will need to activate repeater mode (
Repeater mode and
No Radiation
page 22) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
§Menu§
¤
q
Settings
¤
§§OK§§
¤
q
Handset
¤
§§OK§§
¤
q
Reset Handset
¤
§§OK§§
¤
Reset?
¤
§§OK§§
Restoring the base station
When restoring factory settings:
◆
Individual settings are reset.
◆
All lists are deleted.
◆
The
No Radiation
mode is deactivated.
The date and time are retained. The answering machine (A475A only) is ready for use approx. 15 seconds after the base
station has been reset.
Resetting the base station via the menu
When resetting via the menu
◆
Handsets are still registered.
◆
The system PIN is not reset.
§Menu§
¤
q
Settings
¤
§OK§
¤
q
Base
¤
§OK§
¤
q
Base Reset
¤
§OK§
¤
Reset?
¤
§OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆
All handsets are de-registered and
◆
The system PIN is reset to the original code
0000
.
Carry out the following steps:
Remove the mains cable from the base station. Hold down the
registration/paging key
on the base station (
page 1) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.