77
Registering cordless Gigaset 1000TAE
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
Geraete.fm
21.2.02
Step
by
Step
Registering cordless Gigaset 1000TAE
The cordless Gigaset 1000TAE allows analog terminals e.g. telephones, fax
machines or answering machines to be operated cordlessly from your base sta-
tion.
The base station system PIN must be set to "0000" before the device is put into
operation, see To change the system PIN see page 69.
Press the green illuminated key on the base station.
Prepare the 1000TAE for registration (see the Gigaset 1000TAE operating in-
structions).
A connection is setup between the base station and the TAE. The 1000TAE is
assigned the lowest available internal number. An available internal number
cannot be selected via the 1000TAE.
Setting the device type for cordless TAE
When operating a cordless TAE on Gigaset 4170/4175isdn, you must define the
type of the connected device.
Making calls with devices with TAE connection.
Telephones with tone dialling (DTMF = dual-tone multi-frequency signalling)
can be used with TAE connections. Telephones with DP (dialling pulse) are not
supported. Setting the device type see page 74.
Activating/deactivating automatic line seizure
With automatic line seizure, the trunk line is seized immediately when the
handset is lifted. Normal internal dialling is thus no longer possible. By pressing
the [
R
] key, however, an internal call can be made by means of an internal en-
quiry.
Press
G
for selection menus.
Select using [
Á
] and [OK]:
Base Settings
→
Settings
→
Setup user
→
Setup device
.
Select using [
Á
] and [
W
]:
(cordless subscriber, analogue subscriber or Gigaset
1000TAE subscriber or GAP handset subscriber)
.
Select using [
Á
] and [OK]:
Auto. seizure
.
Making external calls
Making internal calls
Making internal calls with GAP handsets
1.
2.
1.
2.
3.
4.
Autom. line seizure deactivated
Autom. line seizure activated
‘ 0 £
‘ £
Autom. line seizure deactivated
‘ £
Autom. line seizure deactivated
‘ £
or
I £
