46
Displaying costs and call duration
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
Anlage.fm
21.2.02
Step
by
Step
Displaying costs and call duration
Call charge display
You can use call charge display if you have registered for this with your provider.
The units/total charges accumulated and the cost of the last call completed can
(depending on programming) be checked using your Comfort handset. The to-
tal cost includes the charges incurred by the handset. If you do not receive tariff
information from your provider the duration of the call will be displayed.
Configuring determination of costs
Check with your provider as to whether the call costs will be transmitted as ta-
riff units or as amounts. You can then set the accounting method accordingly
as either
units centr.off.
or
costs centr.off.
.
If you have selected
costs centr.off.
but only units have been transmitted by the
service provider, the device automatically switches to
units centr.off.
when the
call is completed.
Setting up costs centr.off.
Press
G
for the selection menus.
Select using [
Á
] and [OK]:
Costs
.
Select using [
Á
] and [OK]:
Type of calcul.
Select using [
Á
] and [OK]:
costs centr.off.
If the item is marked with
9
the call costs transmitted by the provider will be
displayed. No further settings are needed.
If you have also entered a rate (see Secti on, "Entering the price per unit") the
call costs will be multiplied by this rate. You can also use a rate if you want to
bill for higher call costs, otherwise disable the rate (the cost display is to be in-
creased by factor 2, for example).
Setting up units centr.off.
Press
G
for the selection menus.
Select using [
Á
] and [OK]:
Costs
.
Select using [
Á
] and [OK]:
Type of calcul.
Select using [
Á
] and [OK]:
units centr.off.
If the item is marked, the units transmitted by the provider will be displayed or
used to calculate the costs. If the default setting
No rate
is used, the units will
be displayed.
1.
2.
3.
4
4.
Info
1.
2.
3.
4.
