- 13 -
Hardware Installation
The CPU carrier frame must be slided into the CPU rail frame with the CPU. Do not remove the CPU
from the CPU carrier frame.
1-3-1 Installing the CPU
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•
Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•
Prepare a T20 star screwdriver.
•
Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•
Apply an even and thin layer of thermal grease on the surface of the CPU.
•
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•
Set the CPU host frequency in accordance with the CPU specifications. It is not recommended
that the system bus frequency be set beyond hardware specifications since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU, graphics
card, memory, hard drive, etc.
AMD Socket sTRX4
CPU
Pin One Triangle
CPU Load Plate Screw
CPU Load Plate Screw
Pin One
Triangle
CPU Carrier Frame
