manualshive.com logo in svg

Gigabyte R282-G30, Руководство пользователя, Страница: 61 / 109

Поделиться
Скачать
Gigabyte R282-G30 Скачать руководство пользователя страница 61

- 61 -

BIOS Setup

5-2-4  PCI Subsystem Settings

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

PCI Express Slot # I/O ROM

(Note1)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Onboard LAN1/ LAN2 Controller

(Note2)

Enable/Disable the onboard LAN1/ LAN2 controller.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Onboard LAN1/ LAN2 I/O ROM

(Note2) 

Enable/Disable the onboard LAN1/ LAN2 devices, and initializes 
device expansion ROM.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is 

Enabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item 
Enable/Disable Single Root IO Virtualization Support. 
Options available: Enabled, Disabled. Default setting is 

Enabled

.

(Note1)  This section is dependent on the available PCIe Slot.
(Note2)  This section is dependent on the available LAN controller.

Содержание R282-G30














































































































Отзывы:

Нет отзывов