manualshive.com logo in svg

Gigabyte R282-3C0, Руководство пользователя, Страница: 71 / 118

Поделиться
Скачать
Gigabyte R282-3C0 Скачать руководство пользователя страница 71

- 71 -

BIOS Setup

5-2-6 

Network Stack Configuration

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv4 PXE Support

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv4 HTTP Support

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Ipv6 PXE Support

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv6 HTTP Support

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

PXE boot wait time

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Содержание R282-3C0























































































































Отзывы:

Нет отзывов