manualshive.com logo in svg

Gigabyte R282-3C0, Руководство пользователя, Страница: 107 / 118

Поделиться
Скачать
Gigabyte R282-3C0 Скачать руководство пользователя страница 107

- 107 -

BIOS Setup

5-4-4 

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Selects to configure LAN channel parameters statically or dynamically 

(DHCP). Do nothing option will not modify any BMC network parameters 
during BIOS phase.

Options available: Unspecified, Static, DynamicBmcDhcp. Default setting 

is 

DynamicBmcDhcp

.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 
192.168.000.001.

Router IP address

Displays the Router IP Address information. 

Station MAC address

Displays the MAC Address information. 

Real-time get BMC network 
address

Press [Enter] will set LAN mode and Address source and then get IP, 
Subnet, Gateway and MAC address.

Содержание R282-3C0























































































































Отзывы:

Нет отзывов