Gigabyte R183-Z91, Руководство пользователя, Страница: 23 / 165

System Hardware Installation
- 23 -
3-1 Removing Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis cover:
1. Remove the screws on both sides of the back chassis cover. ( Note: For safe shipping,
installation screws are added and should be removed before deployment/putting it in the
server cabinet.
)
2. Remove the screw securing the back chassis cover.
3. Push button to unlock the handle.
4. Pull the grip handle to open the panel cover.
5. Slide the back chassis cover towards the rear and remove the chassis cover in the direction
indicated.
6. Remove the screws securing the front chassis cover.
7. Slide the front chassis cover towards the rear and remove the chassis cover in the direction
indicated.
8. To reinstall the chassis cover reverse steps 2-7.
3
4
2
5
1
1
6
7
6