11
Figure 3-8
.
Current link states of the Access Point Mode
Access Point:
The AP mode You can change WLAN mode(
see
3-1 Info
) by clicking on
this button.
More Setting
: You can set the configuration Access Point(
see
Figure 3-9
) by clicking on
this button.
WEP(ON/OFF)
: You can using WEP (Wired Equivalent Privacy) by clicking on this button.
Figure 3-9
.
Configuration of the Access Point Mode
Change:
Press this button to setting the default value in each field of the panel. The
“Apply” button should be pressed before the default values are saved to the driver and
registry.
Channel:
The current channel used by the Access Point.
Basic Rate:
The transmission rate for transmitting data packets at the user end. You may
set the transmission rate to 1Mb, 2 Mb, 5.5 Mb, 11 Mb.
SSID:
Network name.
