background image

  7 

 

 

Channel:

 The current channel used by the wireless LAN card. 

 

Tx Rate:

 The current transmission rate used by the wireless LAN card. 

 

AP Signal:

 It shows the signal quality and signal intensity of the currently connected base 

station.   

 

Available Network:

  This item will show you all of the 802.11 Access Points or Wireless 

LAN Cards in your wireless environment. The icon in the front of every item 
represents an Access Point or a Wireless LAN Card.  You can add a network easily 
by clicking on the desired SSID. 

 

Strength: 

It shows the signal quality and signal intensity of the currently connected base 

station. 

 

Signal Quality: 

It is which represents the quality of communication between the Wireless 

LAN Card and Access Point. 

 

Refresh(

):

 After this button is clicked, the wireless  LAN card  will rescan the wireless 

environment and show you all the updated reachable Access Points and Stations. 

 

Connect(

):

 After this button is clicked, the wireless LAN card will connect the wireless 

environment reachable Access Points or wireless LAN card. 

 

Mode(Station):

  The  WLAN  mode  You can  change  AP mode(

see 

3-8 Access Point

) by 

clicking on this button. 

 
 

3-2.  Statistics 

 

The “

Statistics

” tab shows you the number of packets sent and received by the card(

see 

Figure 3-3

).   

 

Figure 3-3.  

The statistic number of packets sent and received by the card 

       

 

 
 

3-3.  Configuration 

The Configuration Tab contains several fields where operating parameters of the driver 

Содержание GN-WBZB-M




















Отзывы: