background image

18 

 

3-1-2-2. 802.1x 

Settings - CA Server Tab 

 

CA Server is used when TLS, TTLS or PEAP is in use. When 

Use certificate chain

 is 

checked, the Client can verify if such server is reliable and then transmit Client Certificate 
after the verification is confirmed.   
 

 

 

Figure 3-7.    CA Server Setting 

 

To verify the CA server: 
 

1.  Confirm if the Server Certificate is issued by assigned certificate issuer. If “Allow 

Intermediate Authentication” is checked, the server certificate can be issued by 
one intermediate certificate issuer. 

 

2.  Check the server name of server certificate is the same as the name entered by 

the user or belongs to the same domain. 

 

Use certificate chain: 

If “Use certificate chain” is checked, it indicates that Client will 

confirm whether CA server is reliable. (Default: OFF)

 

 
Certificate issuer:

 CA of a server certificate can be selected from certificate issuers on 

the drop-down list. (Default: ANY) 
 

Allow intermediate Certificates:

 When this option is checked, the certificate issuer can 

be an issuer recognized by a specific certificate issuer. On the other hand, the server 
certificate must be issued by a certificate issuer selected by the user. 
 

Server name:

 This value can be a server name or the name of a domain where the server 

is located. 

Содержание GN-WB32L-RH

















































Отзывы: