Gigabyte GD-2018BP, Руководство пользователя

Страница: 7 / 12

6
Connection Instructions
Note: Before installation, please make sure to power off the display and the computer.
○
1
Power Cord Plug the female end of the power cord to the power socket on the rear of
the display. Then plug the male end to the AC power outlet.
○
2
Signal Cable
(VGA)
As one end of the signal cable is already attached to the display, just
connect the other end to the output jack on your PC’s video card and
then fasten the screws.
○
3
Audio Cable Connect one end of the audio cable to the audio in socket on the display
and the other end to the audio out jack on your PC.
! Warning:
1. Please verify the video card you are using and use appropriate signal cable.
2. Pay attention to the PIN assignments and connection directions. Do not force to bend the pins.