Gigabyte GA-P67A-UD4 Скачать руководство пользователя страница 10

Страница: 10 / 120

Hardware Installation

- 10 -

1-2 Product Specifications

CPU



Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1155 package

(Go to GIGABYTE's website for the latest CPU support list.)



L3 cache varies with CPU

Chipset



Intel

P67 Express Chipset

Memory



4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.



Dual channel memory architecture



Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules



Support for non-ECC memory modules



Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules)

Audio



Realtek ALC892 codec



High Definition Audio



2/4/5.1/7.1-channel



Support for Dolby

Home Theater



Support for S/PDIF Out

LAN



1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots



1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.



1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot will operate at up to x8 mode.



3 x PCI Express x1 slots

(All PCI Express slots conform to PCI Express 2.0 standard.)



2 x PCI slots

Multi-Graphics



Support for ATI CrossFireX

™

/NVIDIA SLI technology

Technology

* The PCIEX16 slot operates at up to x8 mode when ATI CrossFireX

™

is enabled.

Storage Interface



Chipset:

- 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA

6Gb/s devices

- 4 x SATA 3Gb/s connectors (SATA2_2, SATA2_3, SATA2_4, SATA2_5)

supporting up to 4 SATA 3Gb/s devices

- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the
system performance of the RAID set may vary depending on the devices being con-

nected.



Marvell 88SE9128 chip:

- 2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA

6Gb/s devices

- Support for SATA RAID 0 and RAID 1

Содержание GA-P67A-UD4

























































































































Результаты поиска

Содержание GA-P67A-UD4

Отзывы:

Gigabyte GA-P67A-UD4, Руководство пользователя, Страница: 10 / 120

Результаты поиска

Содержание GA-P67A-UD4

Отзывы: