BIOS Setup
- 28 -
Isochronous Support
Determines whether to enable specific streams within the CPU and Chipset. (Default: Enabled)
Virtualization Technology
(Note)
Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Tech-
nology will allow a platform to run multiple operating systems and applications in independent partitions.
With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled)
(Note) This item is present only when you install a CPU that supports this feature. For more information
about Intel CPUs' unique features, please visit Intel's website.
Miscellaneous Settings
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Miscellaneous Settings
Isochronous Support
[Enabled]
Virtualization Technology
(Note)
[Enabled]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
2-4 Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Wed,
May 25 2011
Time (hh:mm:ss)
22:31:24
IDE Channel 0 Master
[None]
IDE Channel 1 Master
[None]
IDE Channel 2 Master
[None]
IDE Channel 3 Master
[None]
Halt On
[All, But Keyboard]
Base Memory
640K
Extended Memory
941M
Total Memory
950M
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
Date (mm:dd:yy)
Sets the system date.
Time (hh:mm:ss)
Sets the system time.
IDE Channel 0, 1 Master
IDE Channel 0, 1 Master
Configure your SATA devices by using one of the three methods below:
None
If no SATA devices are used, set this item to
•
None
so the system will skip the
detection of the device during the POST for faster system startup.
Auto
Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
Manual
Allows you to manually enter the specifications of the hard drive when the hard
•
drive access mode is set to
CHS
.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
