- 11 -
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the
multi-channel audio feature through the audio driver.
•
When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•
When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent
an electrical short inside the cable connector.
Mic In Jack (Pink)
The Mic in jack. Microphones must be connected to this jack.
1-7 Internal Connectors
1)
ATX_12V_2X4
2)
ATX
3)
CPU_FAN
4)
SYS_FAN1/2/3
5)
SATA3 0/1
6)
SATA2 2/3
7)
F_PANEL
8)
F_AUDIO
9)
SPDIF_O
10)
F_USB1/F_USB2
11)
BAT
12)
CLR_CMOS
1
2
7
10
8
4
5
4
11
6
3
4
9
12
Read the following guidelines before connecting external devices:
•
First make sure your devices are compliant with the connectors you wish to connect.
•
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
•
After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.