Gigabyte GA-7VM400M-P, Руководство пользователя

Страница: 27 / 96

- 23 - Hardware Installation Process
English
1
HD+
SPK-
19
HD-
SPK+
20 2
1
1
Speaker
Connector
Soft Power
Connector
1
1
1
MSG+
MSG-
Message LED/Power/
Sleep LED
PW-
PW+
IDE Hard Disk
Active LED
RES+
RES-
Reset Switch
NC
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
Pin 2: LED cathode(-)
SPK (Speaker Connector) Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch) Open: Normal Operation
Close: Reset Hardware System
PW (Soft Power Connector) Open: Normal Operation
Close: Power On/Off
MSG(Message LED/Power/Sleep LED) Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC NC
7) F_PANEL (2x10 pins connector)
Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front panel
to the F_PANEL connector according to the pin assignment above.
-P
8) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink
when the system enters suspend mode. If you use dual color LED, power LED will turn to another color.
-P
Pin No. Definition
1 MPD+
2 MPD-
3 MPD-
1