Gigabyte G482-Z50 Скачать руководство пользователя страница 12

Страница: 12 / 153

Hardware Installation

- 12 -

1-2

Product Specifications

CPU

AMD EPYC 7002 series processor family

Dual processors, 7nm

Up to 64-core, 128 threads per processor

TDP up to 225W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be

unavailable.

Compatible with AMD EPYC 7001 series processor family

Socket

SP3

Chipset

System on Chip

Memory

32 x DIMM slots

DDR4 memory supported only

8-channel memory per processor architecture

RDIMM modules up to 64GB supported

LRDIMM modules up to 128GB supported

Memory speed: Up to 3200* / 2933 MHz
NOTE: Follow the BIOS setting and memory QVL list if running 3200 MHz
with 2DPC.

LAN

Rear side:
- 2 x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
- 1 x 10/100/1000 management LAN

Front side:
- 2 x 1Gb/s BASE-T LAN ports (Intel® I350-AM2)

Expansion Slot

System is validated for population with a uniform GPU model

Support is not provided for mixed GPU populations

G482-Z50

10 x PCIe x16 slots (Gen3 x16 bus) for GPU

1 x PCIe x16 (Gen3 x8 bus) half-length low-profile slot in front, occupied by

CRA3338 HBA

1 x PCIe x16 (Gen3 x16 bus) half-length low-profile slot at rear

G482-Z51

8 x PCIe x16 slots (Gen4 x16 bus) for GPU

Support for PCIe Gen3 is available only if an AMD Naples processor is installed.

Video

Integrated in Aspeed® AST2500

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

NOTE:

We reserve the right to make any changes to the product specifications and product-related informa

tion without prior notice.

Содержание G482-Z50


























































































































































Результаты поиска

Содержание G482-Z50

Отзывы:

Gigabyte G482-Z50, Руководство пользователя, Страница: 12 / 153

Результаты поиска

Содержание G482-Z50

Отзывы: