Gigabyte G481-S80 Скачать руководство пользователя страница 93

Страница: 93 / 124

- 93 -

BIOS Setup

5-3-7

PCH Configuration

Parameter

Description

PCH Configuration

PCH SATA Configuration

Press [Enter] to configure advanced items.

SATA Controller

– Enable/Disable SATA controller.

– Options available: Enable/Disable. Default setting is

Enable

Configure SATA as

–

Configures on chip SATA type.

– AHCI Mode: When set to AHCI, the SATA controller enables its

AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.

– RAID Mode: When set to RAID, the SATA controller enables both

its RAID and AHCI functions. You will be allowed to access the
RAID setup utility at boot time.

– Options available: AHCI/RAID. Default setting is

AHCI

Alternate Device ID on RAID

(Note 1)

– Enable/Disable Alternate Device ID on RAID mode.

– Options available: Enable/Disable. Default setting is Disabled

– Please note that this option appears when HDD is in

RAID Mode

SATA Port 0/1/2/3/4/5/6/7

–

The category identifies SATA hard drives that are installed in the

computer. System will automatically detect HDD type.

Содержание G481-S80





























































































































Результаты поиска

Содержание G481-S80

Отзывы:

Gigabyte G481-S80, Руководство пользователя, Страница: 93 / 124

Результаты поиска

Содержание G481-S80

Отзывы: