manualshive.com logo in svg

Gigabyte G481-S80, Руководство пользователя, Страница: 76 / 124

Поделиться
Скачать
Gigabyte G481-S80 Скачать руководство пользователя страница 76

BIOS Setup

- 76 -

5-2-12 

Network Stack Configuration

(Note)  This item appears when 

Network Stack

 is set to 

Enabled

.

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

PXE boot wait time

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Содержание G481-S80





























































































































Отзывы:

Нет отзывов