manualshive.com logo in svg

Gigabyte G481-S80, Руководство пользователя, Страница: 101 / 124

Поделиться
Скачать
Gigabyte G481-S80 Скачать руководство пользователя страница 101

- 101 -

BIOS Setup

5-4  Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is 

Disabled

.

FRB-2 Timer 
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 

6 

minutes

.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is 

Do Nothing

.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog 
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

OS Wtd Timer 
Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 

10 

minutes

.

Please note that this item is configurable when OS Watchdog Timer is set to 

Enabled.

OS Wtd Timer 
Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is 

Reset

.

Please note that this item is configurable when OS Watchdog Timer is set to 

Enabled.

Содержание G481-S80





























































































































Отзывы:

Нет отзывов