Gigabyte G292-2G0 Скачать руководство пользователя страница 67

Страница: 67 / 113

- 67 -

BIOS Setup

5-2-6

Network Stack Configuration

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 PXE Support

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 HTTP Support

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

Ipv6 PXE Support

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is

Disabled

Ipv6 HTTP Support

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

PXE boot wait time

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Содержание G292-2G0


















































































































Результаты поиска

Содержание G292-2G0

Отзывы:

Gigabyte G292-2G0, Руководство пользователя, Страница: 67 / 113

Результаты поиска

Содержание G292-2G0

Отзывы: