Gigabyte G292-2G0 Скачать руководство пользователя страница 111

Страница: 111 / 113

- 111 -

BIOS Setup

5-7 Save & Exit Menu

The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit
options then press <Enter>

Parameter

Description

Save Options

Save Changes and Exit

Saves changes made and closes the BIOS setup.
Options available: Yes, No.

Discard Changes and Exit

Discards changes made and exits the BIOS setup.
Options available: Yes, No.

Save Changes and Reset

Restarts the system after saving the changes made.
Options available: Yes, No.

Discard Changes and Reset

Restarts the system without saving any changes.
Options available: Yes, No.

Save Changes

Saves changes done so far to any of the setup options.
Options available: Yes, No.

Discard Changes

Discards changes made and closes the BIOS setup.
Options available: Yes, No.

Default Options

Содержание G292-2G0


















































































































Результаты поиска

Содержание G292-2G0

Отзывы:

Gigabyte G292-2G0, Руководство пользователя, Страница: 111 / 113

Результаты поиска

Содержание G292-2G0

Отзывы: