manualshive.com logo in svg

Gigabyte E251-U70, Руководство пользователя, Страница: 87 / 111

Поделиться
Скачать
Gigabyte E251-U70 Скачать руководство пользователя страница 87

- 87 -

BIOS Setup

5-3-11  Power Policy

Parameter

Description

Power Policy Quick Settings

Selects a Power Policy Quick Setting.

Options available: Standard, Best Performance, Energy Efficient, Turbo 

Lock.

SpeedStep (Pstates)

Conventional Intel SpeedStep Technology switches both voltage and 
frequency in tandem between high and low levels in response to processor 
load.
Options available: Enable/Disable. Default setting is 

Enable

.

Turbo Mode

When this item is enabled, the processor will automatically ramp up the 
clock speed of 1-2 of its processing cores to improve its performance. 
When this item is disabled, the processor will not overclock any of its core.
Options available: Enable/Disable. Default setting is 

Enable

.

CPU C6 report

Allows you to determine whether to let the CPU enter C6 mode in system 
halt state. When enabled, the CPU core frequency and voltage will be 
reduced during system halt state to decrease power consumption. The C6 
state is a more enhanced powersaving state than C1.
Options available: Disable, Enable, Auto. Default setting is 

Auto

.

Enhanced Halt State (C1E)

(Note)

Core C1E auto promotion control. Takes effect after reboot.
Options available: Enable/Disable. Default setting is 

Enable

.

(Note)  Advanced items prompt when this item is defined.

Содержание E251-U70
















































































































Отзывы:

Нет отзывов