background image

- 3 -

LCD Monitor User’s Manual

SAFETY INFORMATION

Regulatory Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions:
•  This device may not cause harmful interference, and
•  This device must accept any interference received including 

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed 

and used in accordance with manufacturer’s instructions, may cause 

harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or 

more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that 

to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise 

emissions from digital apparatus set out in the Radio Interference 

Regulations of the Canadian Department of Communications. 
This class B digital apparatus complies with Canadian ICES-003.

All manuals and user guides at all-guides.com

Содержание AORUS AD27Qd









































Отзывы: