1
Eng
lis
h
Package Contents
¾
GIGABYTE AirCruiser Router with SmartSetup3
¾
Ethernet Network Cable
¾
Power
Adapter
¾
User Guide on CD-ROM
¾
AirCruiser
Quick
Start
Guide
& SmartSetup 3 Quick Guide
Connect the Broadband Router
A. Make sure you have the ISP login information for your Internet connection handy. This information is
normally given to you when you registered for the Internet account. You can also call your ISP for these
settings.
B. Make sure all networking, DSL/Cable modems, and PC’s are
turned OFF.
C. Connect one end of RJ-45 Ethernet network cable (included) from
your PC’s Network Interface Card (NIC) to any one of the Router’s
four (4) LAN ports.
D. Repeat above step to connect any other wired networking device.
E. Connect the terminal end of your DSL or cable modem network
line to the Router’s WAN (Internet) Port.
F. Power on your DSL or cable modem.
G. Connect the AC power adapter to the Router’s power port, and
then plug the adapter into the wall socket.
H. Make sure the power, LAN and WAN LEDs are illuminated green.
I.
Unit will self test for approximately 5 seconds.
J.
Power on the PC you connected to the router in Step C.
Configure the Router
Note: Make sure your PC’s TCP/IP Ethernet adapter is set to “Obtain an IP address automatically”. For
more information see
Windows Help
.
