GIGA-TMS TR4020, Руководство пользователя

Страница: 61 / 161

61
Ethernet address (l) (Main Menu
! ! ! !
Setup
! ! ! !
Advanced..
! ! ! !
Ethernet) TR4030 only
See also: IP address , UDP port , Ethernet address (h)
This Setting, in conjunction with the Ethernet address (h) defines the physical address of the Ethernet
port on the Local Area Network (LAN). The reason the Ethernet address has been split in two (“high” and
“low”) is because the TR4030’s screen does not provide enough space to edit the whole address as one
string.
To change the Ethernet address to, say, “0.1.2.3.4.5”, use the Ethernet address (h) to set the three
leftmost digits (i.e. “000.001.002.”), and this Menu Item to set the three rightmost digits (i.e. “.003.004.005”).
Please, note, that according to the Ethernet address specifications, the leftmost digit of the Ethernet address
must always be even. Example: “0.1.2.3.4.5” is a correct address. “21.17.135.255” is invalid address
because “21” is an odd number.
It is highly unlikely that you will ever need to change this address. All Ethernet-enabled devices in the
“universe” are supposed to have unique Ethernet address and each TR4030 comes with its own unique
factory address and is reset to this address each time you perform a
System Reset .