GIGA-TMS PROMAG TR610, Руководство пользователя

Страница: 28 / 69

TR610 User's Manual 28
© 2010 GIGA-TMS Inc.
3.1.1.4 Date/Time
This menu lets you configure the following:
Time server IP: This is the IP address of an SNTP (Simple Network Time Protocol) server, used for
synchronizing the time automatically. The value of this setting is preset and should normally work
without requiring change. You can read more about this under
Time Synchronization .
If your TR610 connects to AggreGate LinkServer, LinkServer will automatically set its
internal clock. In this mode, Time Synchronization with an SNTP server is not available.
Auto synchronization: This option enables or disables automatic daily synchronization with the SNTP
server.
Auto synchronization time: This option sets the time of day in which automatic synchronization will
take place, if enabled.
Time zone: When using time synchronization, the terminal gets the time in GMT (UTC). For the time to
be correct, the time zone for your geographic location must be set. You may use the list of
Time Zones
(in the Reference section) for this setting.
Date (dd/mm/yyyy): Enter the current date here, if you're not using the Auto Sync or AggreGate
features.
Time (hh:mm): If you're not using the Auto Sync or AggreGate features, enter the current time
here, in 24-hour ("military time") format. So 4:00 pm would be 16:00.
Synchronize (button): Initiates SNTP synchronization using the settings above.
Once you have changed the settings as needed, click Save. These settings apply immediately and do
not require a reboot.
17
40
66 52
17 40
17 40