GIGA-TMS PROMAG TR610 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 69

GIGA-TMS PROMAG TR610 Скачать руководство пользователя страница 26

TR610 User's Manual

26

© 2010 GIGA-TMS Inc.

3.1.1.2 Network

This menu lets you configure the following:

DHCP: Dynamic Host Configuration Protocol (DHCP) is used to obtain an IP address automatically
within the network. With DHCP enabled and a suitable network setup, you would not have to manually
set an IP address, Gateway IP or a netmask.

Just because the DHCP setting is Enabled does not mean it will necessarily work. If
DHCP is enabled but fails for some reason (e.g, is not configured on the local subnet), the
TR610 will keep trying to acquire an IP address using DHCP every few minutes.

IP address: This is the IP address for the TR610. It needs to be manually assigned only if DHCP is
disabled. With DHCP enabled, this field displays the currently assigned address.

Gateway IP: This is the IP address for the gateway connecting the terminal's subnet with a larger
network (usually the Internet). It is used for accessing time servers for

automatic time synchronization

, and also for accessing the

server, in case it is outside the current local subnet.

Netmask: This is the netmask for the network on which the terminal is installed.

Once you have changed the settings as required, click Save. You may have to

the device for

all settings to apply.

17

40

34

«
...
24
25
26
27
28
...
»

Содержание PROMAG TR610






































































Отзывы:

Нет отзывов