- 14 -
Installing a Wall-Mount Bracket (Optional)
Use only a 100 x 100 mm VESA compatible wall mount kit.
1 .
Place the monitor on the lower EPS foam, with the screen facing down.
2 .
Push the release button upwards to disengage the stand from the
monitor.
Then remove the stand.
3 .
Attach the mounting bracket to the mounting holes at the rear of the
monitor. Then use the screws to secure the bracket in place.
Note:
To mount the monitor on the wall, refer to the installation guide
that is included in the wall-mount bracket kit. VESA mounting screw size:
M4 x 20mm minimum.
