GIGA-BYTE TECHNOLOGY GA-Z270X-Gaming 5 Скачать руководство пользователя страница 6

Страница: 6 / 52

1-2 Product Specifications

CPU

Support for 7th and 6th generation Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors/Intel

Core

™

i3 processors/

Intel

Pentium

processors/Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z270 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR4 2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Maximum shared memory of 1 GB

Audio

Realtek

ALC1220 codec

Support for Sound Blaster X-Fi MB5

TI NE5532 operational amplifier

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

1 x Intel

GbE LAN chip (10/100/1000 Mbit)(LAN1)

1 x Rivet Networks Killer

™

E2500 LAN chip (10/100/1000 Mbit) (LAN2)

* Teaming is not supported.

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated, the PCIEX16 slot operates at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the M2P_32G connector. The PCIEX4 slot

operates at up to x2 mode when an SSD is installed in the M2P_32G connector.

3 x PCI Express x1 slots

* The PCIEX1_3 slot shares bandwidth with the SATA3 1 connector. The SATA3 1

connector becomes unavailable when the PCIEX1_3 is populated.

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

- 6 -

Содержание GA-Z270X-Gaming 5





















































Результаты поиска

Содержание GA-Z270X-Gaming 5

Отзывы:

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-Z270X-Gaming 5, Руководство пользователя

Результаты поиска

Содержание GA-Z270X-Gaming 5

Отзывы:

Бренды по названию

Популярные бренды