GIGA-BYTE TECHNOLOGY GA-IMB4100TN страница 32 Скачать руководство пользователя

Страница: 32 / 37

Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities

Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives,

and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that

presents the devices of the same type that are connected. This item is present only if at least one device

for this type is installed.

Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled)

SATA Support

All Sata Devices

All SATA devices are functional in the operating system and during the POST.

(Default)

Last Boot HDD Only Except for the previous boot drive, all SATA devices are disabled before the OS

boot process completes.

This item is configurable only when

Fast Boot

is set to

nabled

VGA Support

Allows you to select which type of operating system to boot.

Auto

Enables legacy option ROM only.

EFI Driver

Enables EFI option ROM. (Default)

This item is configurable only when

Fast Boot

is set to

nabled

USB Support

Disable

All USB devices are disabled before the OS boot process completes.

Full Initial

All USB devices are functional in the operating system and during the POST.

Partial Initial

Part of the USB devices are disabled before the OS boot process completes.

(Default)

This item is configurable only when

Fast Boot

is set to

nabled

NetWork Stack Driver Support

Disable

Disables booting from the network. (Default)

Enable

Enables booting from the network.

This item is configurable only when

Fast Boot

is set to

nabled

New Boot Option Policy

Allows you to determine whether to change the boot order when a new device is added.

Dedault

Keeps the previous boot order settings. (Default)

Place First

Set the newly added device as the first boot device.

Place Last

Set the newly added device as the last boot device.

- 32 -

Содержание GA-IMB4100TN






































Результаты поиска

Содержание GA-IMB4100TN

Отзывы:

Похожие инструкции для GA-IMB4100TN

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-IMB4100TN, Руководство пользователя

Результаты поиска

Содержание GA-IMB4100TN

Отзывы:

Похожие инструкции для GA-IMB4100TN

Бренды по названию

Популярные бренды