- 29 -
&
Power On Password
Set the password when
Power On By Keyboard
is set to
Password
.
Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept.
To turn on the system, enter the password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>
again without entering the password to clear the password settings.
&
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
Disables this function. (Default)
Move
Move the mouse to turn on the system.
Double Click
Double click on left button on the mouse to turn on the system.
&
ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to
Enabled
, the following functions will become unavailable: Resume by Alarm,
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
2-7
Save & Exit
&
Save & Exit Setup
Press <Enter> on this item and select
Yes
. This saves the changes to the CMOS and exits the BIOS Setup
program. Select
No
or press <Esc> to return to the BIOS Setup Main Menu.
&
Exit Without Saving
Press <Enter> on this item and select
Yes
. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select
No
or press <Esc> to return to the BIOS Setup Main Menu.
&
Load Optimized Defaults
Press <Enter> on this item and select
Yes
to load the optimal BIOS default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
