GIGA-BYTE TECHNOLOGY GA-F2A55M-S1 Скачать руководство пользователя страница 7

Страница: 7 / 31

- 7 -

1-2 Product Speciications

APU

FM2 Socket:
-

AMD A series processors

AMD Athlon

™

series processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset

AMD A55

Memory

2 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

* The maximum 64 GB of system memory can be supported using 16 GB (or above)

memory modules. GIGABYTE will update the memory support list on the oficial

website when the memory modules are available on the market.

Dual channel memory architecture

Support for DDR3 1866/1600/1333/1066 MHz memory modules

Support for AMD Memory Proile (AMP)/Extreme Memory Proile (XMP) memory

modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard
Graphics

APU with integrated AMD Radeon

™

HD 8000/7000 series graphics:

1 x D-Sub port, supporting a maximum resolution of 1920x1200

Maximum shared memory of 2 GB

Audio

Realtek

ALC887 codec

High Deinition Audio

2/4/5.1/7.1-channel

* To conigure 7.1-channel audio, you have to use an HD front panel audio module

and enable the multi-channel audio feature through the audio driver.

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16

1 x PCI Express x1 slot

(The PCI Express slots conform to PCI Express 2.0 standard.)

1 x PCI slot

Multi-Graphics
Technology

Support for AMD Dual Graphics technology

* Only A series APUs support AMD Dual Graphics.

Storage Interface

Chipset:
-

4 x SATA 3Gb/s connectors

Support for RAID 0, RAID 1, RAID 10, and JBOD

USB

Chipset:

- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through

the internal USB headers)

Internal
Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

4 x SATA 3Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

Содержание GA-F2A55M-S1
































Результаты поиска

Содержание GA-F2A55M-S1

Отзывы:

Похожие инструкции для GA-F2A55M-S1

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-F2A55M-S1, Руководство пользователя

Результаты поиска

Содержание GA-F2A55M-S1

Отзывы:

Похожие инструкции для GA-F2A55M-S1

Бренды по названию

Популярные бренды