GIGA-BYTE TECHNOLOGY GA-6LXGH Скачать руководство пользователя страница 19

Страница: 19 / 103

- 19 -

Hardware Installation

1-5 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive and etc.

PS/2 Keyboard/Mouse Port

Coonnect a PS/2 keyboard or mouse to this port.

Serial Port

Connects to serial-based mouse or data processing devices.

VGA Port

The video in port allows connect to video in, which can also apply to video loop thru function.

SFP+ LAN Port

The SFP+ LAN port provides Internet connection at up to 10 Gbps data rate. The following describes
the states of the LAN port LEDs.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.

USB 3.0 Port

The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB

keyboard/mouse, USB printer, USB flash drive and etc.

KVM Server Management 10/100 LAN Port (GA-6LXGH Only)

The LAN port provides Internet connection with data transfer speeds of 10/100Mbps.

ID Switch Button

This button provide the selected unit idenfication function.

Содержание GA-6LXGH








































































































Результаты поиска

Содержание GA-6LXGH

Отзывы:

Похожие инструкции для GA-6LXGH

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY GA-6LXGH, Руководство пользователя

Результаты поиска

Содержание GA-6LXGH

Отзывы:

Похожие инструкции для GA-6LXGH

Бренды по названию

Популярные бренды