LaneLED INOX42
Page 4 / 17
Created
22.03.2017
roen
Modified
11.07.2018
roen
Object-ID
1181162
2 Introduction
To ensure proper installation, the following steps and notes must be complied with under all circumstances. Only
this way can it be ensured that the product will work to complete satisfaction.
Hazard
Read all instructions before starting installation. Our sales department will be happy to answer any questions
you may have.
2.1 Installation conditions LaneLED
-
To comply with the necessary operating voltage, the number of
connected LaneLED light bars must be adjusted to the line
length.
-
The maximum line length for the number of LaneLED light bars
required must be calculated for the specific installation.
-
LaneLED light bars must be calculated specifically for the plant.
-
Installation only in dry weather or with the installation site cov-
ered.
-
For correct installation, the protective measures and
-
For mounting of the GFK handrail, observe the provisions and
instructions of the manufacturer and the local object provisions (specifications for dowels and threaded
rods, supporting distance, SIA standards, etc…). Observe a standardcompliant and technically properly
executed installation.
