Giesecke & Devrient StarSign Bio Token 3.0 M, Справочное руководство

Страница: 6 / 28

About StarSign Bio Token 3.0 M
Reference Manual StarSign® Bio Token 3.0 M/Edition 10.2005
1 of 23
ID No. 30017639
About StarSign Bio Token 3.0 M
Characteristics
StarSign Bio Token 3.0 M is a USB-PKI token based on the STARCOS 3.0
operating system. The token comprises a fingerprint sensor and on-to-
ken fingerprint verification functionality. The biometric data never leaves
the token.
StarSign Bio Token 3.0 M is supported by StarSign middleware and can
therefore be used for all public key applications supporting MS CAPI
(CSP) or PKCS#11.
Fingerprint verification can be used instead of – or in addition to – PIN
verification, granting a higher user convenience and a real tie between
user and token. This is particularly of interest in applications that require
non-repudiation.
StarSign Bio Token 3.0 M also comprises an independent flash drive.
Features
Features of StarSign Bio Token 3.0 M include:
– Based on STARCOS 3.0 operating system
– On-token sensor, image processing and biometric verification (on-
card matching)
– Supported by StarSign middleware; use with all public key applica-
tions supporting MS CAPI (CSP) or PKCS#11
– Security system according to 7816-4; secure writing and messaging
– Cryptographic authentication and key management
– Encryption
– Symmetric encryption: DES, 3DES
– Asymmetric encryption: RSA-CRT with up to 2048 bits
– Support of up to 4 logical channels
– Biometric enrollment and verification functionality
– LED status indication
– additional flash memory drive
Related Standards
StarSign Bio Token 3.0 M adheres to the following standards:
– ISO/IEC 7816-3
– ISO/IEC 7816-4
– ISO/IEC 19794-2
More information on the relevant standards may be found in the appen-
dix (see ’C Reference Literature’ on page 19).