background image

10 

B. Riding Safety   

!

1. You are sharing the road or the path with others — motorists, pedestrians and other cyclists. Respect 

their rights.   

2. Ride defensively. Always assume that others do not see you.   

3. Look ahead, and be ready to avoid:   

• Vehicles slowing or turning, entering the road or your lane ahead of you, or coming up behind you.   
• Parked car doors opening.   
• Pedestrians stepping out.   
• Children or pets playing near the road.   
• Pot holes, sewer grating, railroad tracks, expansion joints, road or sidewalk construction, debris and 

other obstructions that could cause you to swerve into traffic, catch your wheel or cause you to have an 
accident.  

• The many other hazards and distractions which can occur on a bicycle ride.   

4. Ride in designated bike lanes, on designated bike paths or as close to the edge of the road as possible, in 

the direction of traffic flow or as directed by local governing laws.   

5. Stop at stop signs and traffic lights; slow down and look both ways at street intersections. Remember that 

a bicycle always loses in a collision with a motor vehicle, so be prepared to yield even if you have the 
right of way.   

6. Use approved hand signals for turning and stopping.   

7. Never ride with headphones. They mask traffic sounds and emergency vehicle sirens, distract you from 

concentrating on what’s going on around you, and their wires can tangle in the moving parts of the 
bicycle, causing you to lose control.   

8. Never carry a passenger, unless it is a small child wearing an approved helmet and secured in a correctly 

mounted child carrier or a child-carrying trailer.   

9. Never carry anything which obstructs your vision or your complete control of the bicycle, or which could 

become entangled in the moving parts of the bicycle.   

10. Never hitch a ride by holding on to another vehicle.   

11. Don’t do stunts, wheelies or jumps. If you intend to do stunts, wheelies, jumps or go racing with your bike 

despite our advice not to, read Section 2.F, Downhill, Stunt or Competition Biking, now. Think carefully 
about your skills before deciding to take the large risks that go with this kind of riding.   

12. Don’t weave through traffic or make any moves that may surprise people with whom you are sharing the 

road.  

13. Observe and yield the right of way.   

14. Never ride your bicycle while under the influence of alcohol or drugs.   

15. If possible, avoid riding in bad weather, when visibility is obscured, at dawn, dusk or in the dark, or when 

extremely tired. Each of these conditions increases the risk of accident.   

Содержание - V8.0















































Отзывы: