background image

11

PUMP SYSTEM MALFUNCTION

Preventative Maintenance Check-List & Recommended Spare Parts List

Check 

Daily   Weekly   50hrs 

Every 

       Every 

        Every 

 

 

 

 

500 hrs        1500 hrs 

       3000 hrs

Oil Level/Quality 

X

Oil Leaks 

X

Water Leaks 

X

Belts, Pulley 

 

X

Plumbing 

 

X

Recommended Spare Parts

Oil Change (p/n 1154) 

 

 

     X 

 

Seal Spare Parts (1 kit/pump) 

 

 

 

 

            X 

 

 

(See page 7 for kit list) 

 

 

 

 

Oil Seal Kit (1 kit/pump) 

 

 

 

 

            X

 

(See page 7 for kit list)

 

  

Valve Spare Parts (1 kit/pump)   

 

 

 

 

            X

 

(See page 7 for kit list) 

 

 

 

 

 

 

 

 

 

 

 

   

 

  

 

MALFUNCTION

 

CAUSE

 

REMEDY

The Pressure and/ 

Worn packing seals 

Replace packing seals

or the Delivery 

Broken valve spring 

Replace spring

Drops 

Belt slippage 

Tighten or Replace belt

 

Worn or Damaged nozzle 

Replace nozzle

 

Fouled discharge valve 

Clean valve assembly

 

Fouled inlet strainer 

Clean strainer

 

Worn or Damaged hose 

Repair/Replace hose

 

Worn or Plugged relief valve on pump 

Clean, Reset, and Replace worn parts

 

Cavitation 

Check suction lines on inlet of  

 

 

 

pump for restrictions

 

Unloader 

Check for proper operation

Water in crankcase 

High humidity 

Reduce oil change interval

 

Worn seals 

Replace seals

Noisy Operation 

Worn bearings 

Replace bearings, Refill crankcase  

 

 

oil with recommended lubricant

 

Cavitation 

Check inlet lines for restrictions

 

 

and/or proper sizing

Rough/Pulsating 

Worn packing 

Replace packing

Operation with 

Inlet restriction 

Check system for stoppage, air  

Pressure Drop 

 

leaks, correctly sized inlet   

 

 

 

plumbing to pump

 

Accumulator pressure 

Recharge/Replace accumulator

 

Unloader 

Check for proper operation

 

Cavitation 

Check inlet lines for restrictions    

 

 

and/or proper size

Pressure Drop at Gun 

Restricted discharge plumbing 

Re-size discharge plumbing to    

 

 

flow rate of pump   

 

 

 

   

Excessive 

Worn plungers 

Replace plungers

Leakage 

Worn packing/seals 

Adjust or Replace packing seals

 

Excessive vacuum 

Reduce suction vacuum

 

Cracked plungers 

Replace plungers

 

Inlet pressure too high 

Reduce inlet pressure

High Crankcase 

Wrong Grade of oil 

Giant oil is recommended 

Temperature 

Improper amount of oil in crankcase 

Adjust oil level to proper amount

Содержание P400-5100 Series













Отзывы: