Giant MP4130-3100, Руководство по эксплуатации

Страница: 10 / 12

10
38. Reassemble the inlet valve
assembly in the reverse
order of step #7. Make
certain all the components
are press fit together and
that the spring retainer
(#54) is slightly counter
sunk in the valve housing
(#52). Grease the o-ring
(#53) and install it on to
the valve housing. Rein-
stall the entire inlet valve
assembly into the manifold
(#43). install the tension
plugs
(#42A) and tighten.
39. Lubricate the plungers
(29B) again and slide the
manifold (#43) gently and
evenly over the plungers.
Press the manifold firmly
into place against the
crankcase (#1). Install
the spring washer (#50A)
and tighten the manifold
stud nuts (#50) to 696
inch-pounds (79 Nm).
37. Place the entire discharge
assembly into discharge
port making certain the
assembly is properly seat-
ed. Install discharge plug
(#48) and hand tighten.
Position Item# Description Torque Amount - in.-lbs. (Nm)
17 08095 Hex Screw, Bearing Cover 125 (14)
24A 05349 Hex Screw, Connecting Rod 250 (28)
29C 04150 Bolt, Plunger 300 (34)
50 07158 Nut, Manifold Stud 700 (79)
MP4130-3100 & MP4135-3100 TORQUE SPECIFICATIONS
Pump Mounting Selection Guide
Bushings
01074 24 mm Tapered H Bushing
Pulley & Sheaves
01061 7.75” Cast Iron 1 gr. - AB Section
01062 7.75” Cast Iron - 2 gr. - AB Section
Rails
01160 Plated Steel Channel Rails
(L=5.75”x W=1.00”x h=2.50”)
01161 Plated Steel Channel Rails
(L=5.75”x W=1.00”x H=2.50”)